MATCHED SUPPLY
Smart locks for door manufacturers. If your drilling jig is already set, changing it costs more than the lock. We match the mortise, the backset and the faceplate to your existing door spec, supply a routing template identical to yours, and confirm every dimension in writing before the PO is issued.
Backset
Faceplate
Standards
What moves the price
Send a door drawing and one photograph of the edge, and we return a marked-up drawing showing exactly where the pocket lands on your door.
Tell us the thickness. Below a certain point the mortise body fouls the faceplate screws; beyond another, the spindle needs an extension kit. Thin doors and deep doors take different bodies, and neither is a special order.
The distance from the door edge to the spindle centre. This is the one number that cannot change later, because your jig is built around it. 60 mm is the European norm, 70 mm the common retrofit size — tell us which your line already uses and we work to it.
The cut size for the lock body. We supply a routing template machined to the same tolerance as the pocket, so your line keeps one setup instead of two.
Plate thickness has to sit flush with your edge banding, or the door will not close against the frame. Square or radius profile, stainless or plated.
After-sales split
Agreed in writing before the first PO, and attached to every quotation. No item on this list is resolved by a phone call after the fact.
| YOU | ENTRAVACCESS | |
|---|---|---|
| Lock does not fit the pocket | Cut the pocket to the confirmed drawing | Replace the unit if the drawing we confirmed was wrong |
| Damaged in transit | Inspect on arrival, note on the POD | Claim and replace against the insurance |
| Electronic failure in warranty | Swap the module at the door | Ship the replacement free of charge |
| Installation error | Retrain the fitter | Send a one-page fitting sheet per carton |
| App or cloud outage | Nothing | Fully ours including the customer notice |
| Spare parts after warranty | Order from stock | A spare-parts holding is kept for the model, stated in your quotation |
← Swipe to compare →
Test coordination
Cycle-testing a lock on a steel block tells you the lock survives a steel block. We machine a door blank to your drawing — same thickness, same pocket, same edge banding — mount the lock, and run the cycle test on the assembly.
Same substrate, thickness and pocket tolerance as your production door.
Open and close counted with the latch engaging the strike, not free-running. The count is agreed with you and recorded in the report.
Packed unit dropped per ISTA 1A before the packaging spec is signed off.
You receive the drawing and the test report so your QC can reproduce the same test without asking us.
Which Lock
The door decides, not the other way round. Nearly every line we are asked to fit falls into one of these three cavities.
A 22 mm body for slim aluminium and steel frames. Stile width is the constraint, and it eliminates most standard mortise bodies before the conversation starts.
Wood, steel and composite doors on a 60 or 70 mm backset. The default shape — and the one where your existing jig matters most.
Where the lock should disappear into the door face. The plate sits in a rebate you cut once, and the finish is matched to your colour master.
Models in these families
| MODEL 1 ETV-A2 ANSI lever · mortise, ANSI prep View product specs | MODEL 2 ETV-R4 Keypad + fingerprint · lever View product specs | MODEL 3 ETV-R7 Face + fingerprint · lever | MODEL 4 ETV-R6 Fingerprint + Wi-Fi · lever | |
|---|---|---|---|---|
| Family | 02 Standard mortise | 02 Standard mortise | 03 Flush faceplate | 01 Narrow stile |
| Platform | TT Lock | TT Lock | Tuya | Tuya |
| Rating | - | IP54 | IP65 | IP54 |
| Why it is on this page | Fits an ANSI bore without re-cutting the jig. Ask for the routing template before the PO, not after. | The standard 60 / 70 mm pocket — the shape most door lines already run, so the template is a copy of yours. | For a premium door line where the lock is part of what the door sells on, and the door is rated for exterior use. | Wi-Fi at the door when the door has power. No gateway in the plant, no extra box on the line. |
| Next step | Request a quote | Request a quote | Request a quote | Request a quote |
← Swipe to compare →
In the carton
Half of what you ship is not the lock. The carton is fixed at spec freeze, not at shipment: structure and finish (rigid or folding, spot UV, foil, matte lamination, die-line as an approved PDF), the compliance panel — CE, RoHS, importer and batch details — read against your market's labelling rules, the document set inside, and the weight and dimension declared per SKU so your freight quote is not a guess.
Bad Fit
If the pocket moves between batches, no template can hold. Fix the jig first — the lock is the easy part of that problem.
We are not the lowest quote on a plain mechanical mortise, and we will not pretend to be. The work is in matching a lock to a door that already exists.
Every dimension on this page is confirmed from your drawing. Without one we would be guessing at the only thing that decides the order.
Before you brief us
Yes, that is the default. Send the mortise drawing or a physical sample and we match the pocket, the backset and the faceplate thickness. Tooling is usually not required — the body is machined to your dimension, not re-cast.
Separate by default, because a fitted lock protrudes from the door face and is the first thing damaged in handling. If your line prefers pre-fitted, we supply a jig-mounted version with the lock temporarily pinned, and your fitters only torque the final screws.
We ship a replacement module, not a whole door. The module swaps at the door with a single tool. The split above applies — if the failure is electronic it is ours, and for the warranty period we cover the courier both ways.
Yes. Most door factories start with a single entry-door SKU and add the room-door and glass-door variants once the fitting process is proven on their line. The matched-tooling cost is per model, not per range.
A section drawing, the door thickness and one photograph of the edge is enough. You will get the pocket position, the backset and a fixed price per unit.
Drawing review is free · NDA on request